| Air Tool Type
|
Air Nailer
|
| Compressor/Air Tool Features
|
No Additional Features
|
| Energy Type
|
Air
|
| Included
|
Nails
|
| Loading type
|
Strip
|
| Maximum Fastener Size
|
2 in
|
| Minimum Fastener Size
|
1-1/2 in
|
| Minimum Recommended Air Delivery SCFM @ 90PSI
|
2.2
|
| Minimum Recommended Operating Pressure (psi)
|
70
|
| Nail Gauge
|
16
|
| Nailgun Angle
|
0
|
| Reconditioned
|
No
|
| Returnable
|
90-Day
|
| Tools Product Type
|
Air Tool
|
Model number: HDX50LSLWN
Internet number (SKU): 206953859
Price: $137
Brand:
Availability: in stock
Similar products
Description
Pneumatic 2 in. 1-16-Gauge Flooring Nailer with Staples - Product information
Hardwood flooring work is easy with the HDX 2-in-1 Flooring Nailer. The HDX50LSLWN offers professional quality at an affordable price. The HDX 2-in-1 Flooring Nailer has all the power you need to get the job done quickly and features a quick release nose to make quick work out of clearing jams. Other features include an ABS handle to reduce vibration transfer and reduce overall weight (making this nailer 2 lbs. lighter than most other models), a no-mar foot to protect pre-finished surfaces, 500 flooring staples and a fiberglass mallet. The HDX50LSLWN drives 15.5-Gauge Flooring Staples or 16-Gauge L Cleats through the same magazine without any modifications. This pneumatic flooring nailer can be used to install solid tongue and groove hardwood flooring ranging in thickness from 5/8 in. to 3/4 in. including but not limited to cherry, oak, maple and walnut. Backed by a 1 Year Limited Warranty.
- Ultra-light weight design for ease of use
- High density plastic handles to reduce weight and provide minimal vibration transfer
- No-mar design is safe for pre-finished floors
- Fiberglass mallet included
- (500) 15.5-Gauge staples included
- 1 year limited warranty
Product reviews
Rated 4 out of
5
by
Leo from
Good floor nailer
This is a very good floor nailer. I tend to go for the more cost effective selection for floor nailers because I have put down numerous hardwood floors and have went through numerous for nailers in the process. This floor nailer has three good features, one is the high density plastic handle. This makes the tool lighter and after a long day of installing hardwood you appreciate the lighter tool. I didn't know if I would like this feature because of durability, but so far this has not been an issue. The second is that it takes both staples and cleats. and third the easy quick release nose to make quick work out of clearing jams. Only had one jam but this feature sure makes it easier and a big time saver. The last thing this nailer is very cost effective while still being very functional and getting the job done. Also comes with a mallet and the shoes for both 5/8 and 3/4 inch flooring and 500 staples.
Date published: 2017-04-05
Rated 5 out of
5
by
DennisJ from
Solid Constrution and Simple to UseIf you've got flooring to install or sections to repair, this is a great, solidly built unit to have. The included mallet is an impressive piece in itself.
It'll handle both 16ga L cleats or 15.5ga staples, 1-1/2 to 2", both are easy to load. It comes with an already installed, standard 1/4 fitting for your air supply, 70-115psi. It comes with two different, non-marring floor plates, 3/4 and 5/8". Allen wrenches are included, along with a box of staples. The user's guide is clear and easily understood.
Date published: 2017-03-14
Rated 5 out of
5
by
phil from
works greatI am using this nailer to install my ¾" oak flooring and this thing works great no issues at all L cleats and 15.5 gauge staples both work great
Date published: 2017-05-18
Rated 5 out of
5
by
Daniel from
This nailer worked great. Set compressor at 70 lbs and...This nailer worked great. Set compressor at 70 lbs and every staple went all the way in. Used 500 staples for 150 sq ft of unfinished 3/4 red oak. Had to buy more at local Home Depot and they had them in stock.
Ready for the next room soon.
Date published: 2017-12-05
Rated 1 out of
5
by
John from
Very disappointed because it jambs up. On 3 occasions it...Very disappointed because it jambs up. On 3 occasions it will have a nail hang up when it is about to run out of nails. I need to dissemble and reassemble to resume. I am only doing a total of 600 square feet of flooring in 3 bedrooms.
Date published: 2017-11-28
Rated 4 out of
5
by
James from
I think this is a good consumer level flooring nailer....I think this is a good consumer level flooring nailer. Cost is good enough to validate for a one-project purchase. It takes some getting used to the air pressure versus how hard you hit it so the nails are driven to the correct depth. I'm doing 3/4 hickory and am running about 100-105 psi. I plan on giving it to a friend when done so they can do their floor. I'm also running it on the cheapest air compressor HD sells and it uses surprisingly little air, so my compressor is keeping up just fine. Would highly recommend for a DIY job, would go up a few levels in quality if you are a contractor and plan on using it for thousands of SF of flooring installation. I am up to about 100 SF of floor installed and have had zero jams, zero misfires, and zero double shots.
Date published: 2017-07-18
Rated 5 out of
5
by
Abel from
5 Star ReviewRating provided by a verified purchaser
Date published: 2018-01-03
Rated 5 out of
5
by
BikeBoomer from
We purchase this great tool for installing over 1500 sq./ft of oak hard wood flooring and so far ...We purchase this great tool for installing over 1500 sq./ft of oak hard wood flooring and so far we have installed over 300 sq./ft without a single problem, misfire or jam. We are using BOSTITCH FLN-200 2-Inch Flooring L-Nail cleats and a Porter-Cable pancake compressor to drive the nailer. The other great thing is that we purchase this nailer on one of these Home Depot 1-day online sales for $40 less than the current price ... Awesome!!!
Date published: 2017-03-30
