Certifications and Listings
|
No Certifications or Listings
|
Manufacturer Warranty
|
25 year residential,8 year commercial
|
Model number: 015623506
Internet number (SKU): 203528288
Price: $21
Brand:
Availability: in stock
Similar products
Description
Vintage Oak Grey/Worldly Oak 5/16 in. Thick x 1-3/4 in. Wide x 72 in. Length Vinyl Multi-Purpose Reducer Molding - Product information
Vintage Oak Grey Multi-Purpose Reducer is used to transition floors of unequal height from wood/laminate floors to carpet, vinyl or tile. This molding will provide a seamless look when transitioning between flooring surfaces. Providing a beautiful finished look to any room in your home.
- Vintage Grey Multi-Purpose Reducer
- 5/16 in. thickness x 1-3/4 in. width x 72 in. length
- Item coordinates with 3 mm - 5 mm thick vinyl floor
- Vintage Oak Grey, Medium Color, Smooth finish
- Can be installed over both concrete and wooden subfloors
- Appropriate grade for installation: Above grade, On grade or Below grade
- Residential and commercial use
- Don't forget your coordinating trim
- Don't forget your coordinating moldings and trim
- Coordinates with vinyl flooring
- Installation track included with purchase
- Proudly manufactured by Zamma Corporation
Product reviews
Rated 1 out of
5
by
Sharon from
Poor quality. Very thin and paper print not printed well....
Poor quality. Very thin and paper print not printed well.
Date published: 2018-02-06
Rated 1 out of
5
by
Carmella from
These transition pieces did not match my Pergo Vintage Pewter Oak Flooring.These transition pieces did not match my Pergo Vintage Pewter Oak Flooring.
Date published: 2018-05-01
Rated 5 out of
5
by
PJ from
Worked as advertised and blended in well with Lifeproof flooring....Worked as advertised and blended in well with Lifeproof flooring.
Date published: 2018-04-24
Rated 5 out of
5
by
Mikal from
5 Star ReviewRating provided by a verified purchaser
Date published: 2018-02-22
Rated 3 out of
5
by
Nathan from
3 Star ReviewRating provided by a verified purchaser
Date published: 2018-02-07
Rated 4 out of
5
by
KCar from
It was fine...It was fine
Date published: 2017-10-27
Rated 4 out of
5
by
crystal from
DIdn't install as expectedThe reducer molding matched my floor perfectly. But, didn't install as per directions. Maybe there was too big of a transition, but, the metal strip couldn't be used and my installer ended up just screwing it to the floor. Haven't experienced any problems with it and it looks just fine.
Date published: 2016-10-18
Rated 1 out of
5
by
RabbiMeatwad from
The transition piece wasn't the correct depth required...The transition piece wasn't the correct depth required
Date published: 2017-05-01