| Manufacturer Warranty
|
20 Year Warranty
|
Model number: 016071640
Internet number (SKU): 204691648
Price: $49
Brand:
Availability: in stock
Similar products
Description
Coffee HS Hickory 47 in. Long x 12-1/8 in. Deep x 1-11/16 in. Height Laminate to Cover Stairs 1 in. Thick - Product information
Cap A Tread is a durable laminate with pre-attached stair nosing. For updating carpeted or worn out stairs. Easy glue down installation. Cost effective way to add value to your home.
California residents: see
Proposition 65 information 
- Cap A Tread adds character to your stairs
- Durable laminate with pre-attached stair nosing
- 20-year warranty
- Don't forget your coordinating moldings and trim
- Coordinates with laminate floor
- Product is proudly manufactured by Zamma Corporation
Product reviews
Rated 5 out of
5
by
Tom from
The stairs were easy to install and look very good....
The stairs were easy to install and look very good. I hope they wear as well as they look.
Date published: 2018-05-29
Rated 1 out of
5
by
mludka10 from
Do Not Purchase - 50% Damage RateI purchased this product and the riser to match the Pergo laminate flooring I was having installed through Home Depot - thinking that the quality of the "Pergo" name would be carried over to this product... I was wrong. 50% of the product received was damaged and as a special order the leadtime was 3 weeks in each instance - because of the product issues I had to reeive 3 orders over a 10 week span - living in an unfished construction zone during this timeframe. If you're goign to risk purchasing this product, by 3x the amount you need to protect yourself. The product either had visible scrtaches, cracks, dents or an ugly white streak down the length of the cap-a-tread. No one at Home Depot knew anything about the product or the vendor.
The stairs look nice aesthically, but I have huge concerns over the longevity of the product. As the previous reviewer describes this product is a 2-piece construction that looks very weak. I do not trust that two piece joint (stairnose) to last overtime in a high traffic area. In 3 weeks of normal use I have discovered a large, deep, crack/dent in one stair - will try to find a dark putty to fill (caulk didnt work) - but does not bode well for the product overtime.
Date published: 2014-07-21
Rated 5 out of
5
by
Chris from
Costly But EffectiveI chose this product to replace the 6 year old carpet on my stairs. I had to purchase 15 of these which came close to $750. I chose to have these shipped to the store and they came in two weeks earlier than the expected date. Out of the 15 two came in with visible damage on the boxes they were shipped in and only one of those had actual damage which was a three inch cap on the end of the tread. This was not a problem because I was cutting 9 inches off the end anyways but Home Depot still gave me a 25% discount on the two. Installation was quick and easy and exactly like the instructional video shows. I chose an 80 tooth saw blade to cut them with which gave me a nice clean cut with no chipping of the laminate. I chose to custom make my risers out of a 4X8 sheet of 3/4 inch MDF which saved a lot of money over buying the risers from cap a tread. My stair treads are made from 3/4 inch OSB subfloor and the cap a treads covered them perfectly. The color and texture of the laminate is close to the pergo coffee flooring but not a perfect match. Overall other than the costs I am very pleased with this product and the service I received from Home Depot.
Date published: 2015-10-18
Rated 1 out of
5
by
Charlie123 from
Do Not Buy. 40% Damage/Broken Rate.I ordered 5 of these to give a solid finish to my stairs around the landings. Of the 5 I ordered, 2 were damaged out of the box and that is before use! I imagine they will all crack once installed and used. These crack along the edge, as they are two different pieces that are fused together. That juncture does not appear to hold very well. I would suggest you go with the cheaper and likely more sturdy stair nose molding.
Date published: 2014-07-10
Rated 3 out of
5
by
Kim from
We ordered these to match our Pergo. They have not been installed yet, but delivery was no issue ...We ordered these to match our Pergo. They have not been installed yet, but delivery was no issue (no broken/damaged pieces); will update our review once everything is completed.
This is not a perfect match to the Pergo (we expected this, since we understand that Cap a Tread only licenses their system to other brands). There is a bit of a grain to the treads so that it's not completely smooth or glossy, which is nice because the Pergo has a handscraped texture. The texture is not similar to the grain on the Pergo itself, but to us it is not that noticeable. Aesthetically it does match perfectly.
If you are looking for a Cap a Tread that matches perfectly, it may be wiser to choose a laminate with a smoother/glossier finish. Cap a Tread will try, but the texture of a laminate is ultimately created by the manufacturer and Cap a Tread can only do its best. To us we find it efficient, but if you are picky you should keep this in mind.
Date published: 2017-09-25
Rated 1 out of
5
by
Duck from
I did like the color however, the product arrived damaged with a long scratch that was highly vis...I did like the color however, the product arrived damaged with a long scratch that was highly visible. Product looked poorly made. Where the two pieces are joined together it seemed loose like it would crack when stepped on.
Date published: 2018-04-03
Rated 4 out of
5
by
Donald from
Unit had slight defect on one end, but since I...Unit had slight defect on one end, but since I only needed a 35" wide piece, I was able to cut off the bad area. Would have liked more of a "hand scraped" finish to match the Pergo laminate.
Date published: 2018-04-03
Rated 4 out of
5
by
Eric from
The Tried worked very well and hopefully it will wear...The Tried worked very well and hopefully it will wear well also very easy to install!!!
Good alternative with engineered flooring!
Date published: 2018-03-13
