Alexandria Walnut 47 in. Long x 12-1/8 in. Deep x 1-11/16 in. Height Laminate to Cover Stairs 1 in. Thick - 016071537 - 203496695

Alexandria Walnut 47 in. Long x 12-1/8 in. Deep x 1-11/16 in. Height Laminate to Cover Stairs 1 in. Thick - Specifications

Dimensions

Product Thickness (mm) 42.86
Product Width (in.) 47

Details

AC Rating AC3: Residential Heavy Traffic
Color Family
Tan
Color/Finish Alexandria Walnut
Commercial / Residential Commercial / Residential
Flooring Product Type Stair Tread
Gloss Low Gloss
Indoor/Outdoor Indoor
Material Laminate
Material Medium Density Fiberboard, paper, Resin (both Acrylic and Melamine), Polyurethane hot metal adhesive and Olefin hot metal adhesive
Returnable 90-Day

Warranty / Certifications

Model number: 016071537
Internet number (SKU): 203496695
Price: $49
Brand:
Availability: in stock

Similar products





Description

Alexandria Walnut 47 in. Long x 12-1/8 in. Deep x 1-11/16 in. Height Laminate to Cover Stairs 1 in. Thick - Product information

Cap A Tread is a durable laminate with pre-attached stair nosing. For updating carpeted or worn out stairs. Easy glue down installation. Cost effective way to add value to your home.

California residents: see
Proposition 65 information

  • Cap A Tread adds character to your stairs
  • Durable laminate with pre-attached stair nosing
  • 20-year warranty
  • Don't forget your coordinating moldings and trim
  • Coordinates with laminate floor
  • Product is proudly manufactured by Zamma Corporation

Product reviews


Rated 4 out of
5
by
from
The tread adapted well to the nose on the steps....
The tread adapted well to the nose on the steps.

Date published: 2018-04-08

Rated 4 out of
5
by
from
Best option for us
This product ended up being the best option for replacing the carpet on our stairs with something un-carpety. Our house is relatively new construction, and removing the glued-and-nailed particle board treads and risers presented too daunting of a challenge. We are planning to put the Alexandria Walnut pergo in later, so we chose this. It worked out quite nicely, with the following caveats.
1. Each tread had exactly the same "picture" printed on it. The "picture" would vary only in position on the tread, and each tread had the same definite patterns. Our stairs are 36" so we were able to vary the cuts to make the distinctive patterns less obvious.
2. One tread (out of the 12 we ordered) had a 5" crack along the bulnose edge. Luckily we were able to work around the crack thanks again to our 36" steps.
3. This stuff's spendy. You can get a prefinished solid wood tread for the same cost, if you're able to remove the treads you've already got. There are also solid-wood systems similar to this that cost about the same if not a bit less.
4. The color is exactly spot-on with the pergo flooring, but the sheen is different. It isn't textured like the pergo flooring and therefore looks a lot less realistic, but on the other hand the difference may make the treads less slippery.
Overall I'm very glad this product exists and would use it again despite the costs and challenges.
In the photo, the dull areas on either side of the stairs is from the carpet, not the cap-a-tread.
Date published: 2015-01-27

Rated 4 out of
5
by
from
Easy to install. No damage caps, as other reviews mentioned. This was my first wood project ever...
Easy to install. No damage caps, as other reviews mentioned. This was my first wood project ever. My first time using a table saw. Just wish they came in different sizes.
Date published: 2017-11-04

Rated 5 out of
5
by
from
Great transformation
Took old looking step tred and brought it back to life. Easy to install.
Date published: 2016-04-20
Manufacturer Warranty 20 Year Warranty
SKU: 016071537
Price: $49.00