| Lifetime Warranty
|
No
|
| Manufacturer Warranty
|
1 Year Product
|
Model number: PC1010N
Internet number (SKU): 100678074
Price: $8
Brand:
Availability: in stock
Similar products
Description
Polyblend #10 Antique White 10.5 oz. Non-Sanded Ceramic Tile Caulk - Product information
Polyblend 10.5 fl. oz. Non-Sanded Ceramic Tile Caulk features a siliconized, latex-based formula for caulking around sinks, tubs and showers and where tile meets tile or another surface. Also adheres bath fixtures and loose tiles. Formula offers great durability and bond strengths.
California residents: see
Proposition 65 information 
- Matches polyblend grout colors where available (grout sold separately)
- Excellent crack and stain resistant
- Do not use in areas with constant water exposure
- Do not use to install grab bars
- For joint up to 1/4 in. wide and deep
- Sample colors shown may vary from actual grout; final installed shade can differ based on tile type, porosity, job site conditions and finishing techniques
Product reviews
Rated 1 out of
5
by
NoBueno from
Color does not match, dries more yellow. More importantly, its been over a week since applied and...
Color does not match, dries more yellow. More importantly, its been over a week since applied and it still has not dried. There is no expiration date on the tube to know how long its been sitting on the shelf. Maybe I got old stock.
Date published: 2018-05-25
Rated 1 out of
5
by
Lorenzo from
Horrible substitute for grout!!! I went to Home Depot asking for non-sanded grout with silicone i...Horrible substitute for grout!!! I went to Home Depot asking for non-sanded grout with silicone in it per several reputable online articles (This Old House, Angie's List, etc), because the joint needed to be flexible (two shower walls meeting at a corner). This is what a team member told me was the best. Some other shopper also told me the contractor he works for only buys this stuff, "then go over it with caulk"--"looks just like the original grout in the new houses he builds." This simply is just CAULK. NO WAY is it non-sanded silicone grout. Started peeling right after drying. Looking at other answers to questions here "repaired my grout" etc, DO NOT be fooled. It's junk if you plan to do a big crack repair!
Date published: 2018-06-11
Rated 4 out of
5
by
daniel from
The product is fine. No problems with it. I did not have any yellow discoloration that others spo...The product is fine. No problems with it. I did not have any yellow discoloration that others spoke about. I'm using this on my tile backsplash and all the areas are dry areas so maybe that's part of it. But if you use the Customer Building Products bright white grout, as others have said, I think regular bathroom caulk is fine. Not sure why I needed to spend the money on this product. It looks good, no problems, but it's still brighter than the grout that seemed to soften in color. You can see from the photo. I used an arctic white tile from Daltile here. If you use other grout colors from CBP than maybe it would be best to used the color matching caulk, but for bright white I don't know if its necessary.
Date published: 2018-07-18
Rated 1 out of
5
by
JerseyDave from
Use standard white bath caulk to match Custom Building Products "bright white" grout. Do NOT use ...Use standard white bath caulk to match Custom Building Products "bright white" grout.
Do NOT use Custom Building Products "Bright White" Caulk to match their "Bright White" grout.
Like Napasteph's review, I experienced shrinkage. Worse, the Custom Building Products Bright White caulk dryed to a yellow color that looked old and ugly. I covered all of this caulk with a standard 100% silicone bath caulk to get the color back to white.
I have used Custom Building Products caulk to match other grout colors with great success and satisfaction. But for a bright white, standard caulk costs 60% as much, and looks 200% better.
Date published: 2018-06-21
Rated 5 out of
5
by
u961080 from
I used this caulk to seal the gap between a Jacuzzi brand shower stall and tile wall in our bath....I used this caulk to seal the gap between a Jacuzzi brand shower stall and tile wall in our bath. The silicone caulk previously used had failed in several places. This product was easy to apply, tool, and clean. The resulting caulk created a great seal and I have only had to spot-fix two spots in the past four years. A highly recommended product.
Date published: 2018-05-08
Rated 1 out of
5
by
Woodsman from
This product is very difficult to work with. Does not finish like typical ceramic tile caulk. A...This product is very difficult to work with. Does not finish like typical ceramic tile caulk. And....the color did not match the grout. Had to remove and replace with another color closer to the grout color of the same name.
Date published: 2018-06-19
Rated 5 out of
5
by
tootall2012 from
The product is fine. Just wished they offered a smaller size for small repairs. Hate to pay that ...The product is fine. Just wished they offered a smaller size for small repairs. Hate to pay that much to fill a 3 inch gap. The rest of tube will go bad before I need again.
r
Date published: 2018-05-23
Rated 5 out of
5
by
liz from
Super easy to use. Ended up being just slightly lighter...Super easy to use. Ended up being just slightly lighter than the grout along the counter (maybe because it was a little thicker/wetter) but matches the grout perfectly in the corners.
Date published: 2018-07-10
