| Flooring Material Features
|
Crack resistant,Mold/mildew resistant,No mixing required,Rapid setting,Self-Leveling,Water based
|
| Manufacturer Warranty
|
“Fix-A-Floor Worldwide, Inc. is 100% certain you are going to love this product! Fix-A-Floor wants to make sure that you are completely happy with our product and your experience. This is why we offer a full, no fuss 100% money back guarantee or product replacement if proven defective. Thank you for choosing Fix-A-Floor!”
|
Model number: FIX128
Internet number (SKU): 204777604
Price: $54
Brand:
Availability: in stock
Similar products
Description
1 Gal. Repair Adhesive - Product information
Fix-A-Floor is an extra strength repair adhesive customized for the specific use of re-bonding loose and hollow tile, marble, stone and wood flooring without removing or replacing. It’s fast, easy and affordable. DIY - just drill and fill.
- Elastomeric properties allow for the adhesive to never crack and loose its bond
- Gallon jug requires a re-fillable caulk gun to apply
- Great for large problem areas or even the entire floor
- Dries clear within 24 hours
- Easy clean up with sponge and water, dries clear
- Guaranteed for the life of your floor
- Mostly used by professionals
- Non-toxic, non-flammable and eco-friendly
- Fix-A-Floor repair adhesive has super bond strength of 130-135 psi
- Fix-A-Floor is very fluid: 1800-2700 mPa.s 25°C/77°F
- Keep from freezing before use
- Please call 1-800-774-5982 if you require assistance
Product reviews
Rated 5 out of
5
by
Warrior110 from
Terrific product - did what it's supposed to do.
We had many tiles in our family room that were crunchy and sounded like they were going to break. We had had a leak in the ceiling and the water seeped under the tiles and destroyed the stuff that keeps the tiles stuck to the floor. We drilled small holes on the grout near the corners and pushed this white thick liquid inside and it dried and the tiles are now firm and make no noise, nor do they move. It is a really great product that is so much less expensive than replacing the tiles. We had almost 50 tiles that rocked or crunched in varying degrees. To replace those tiles it would have cost us almost $4,500 never mind trying to match the tiles we already had. The house was built in 1978 so matching the tiles may have been impossible. Now the cost to re-glue the tiles with Fix-a-Floor was less than $300. A great saving and really not that hard a job to do. Replacing the tiles would have been a great deal more work and much, much more expensive. Cannot say enough about this stuff, IT WORKS and works very well.
Date published: 2014-07-15
Rated 5 out of
5
by
ddd from
been using this product for years love it...been using this product for years love it
Date published: 2018-06-27
Rated 5 out of
5
by
WizardOfOdds from
This product works very well. I've used 7 gallons to repair at least 100 hollow tiles in my house...This product works very well. I've used 7 gallons to repair at least 100 hollow tiles in my house.
I buy gallons of this glue to refill the 10 oz tubes you find in the store.
How to refill several 10oz tubes using 1 gallon:
Since I have an air compressor at home, I bought 5 tubes of the glue to begin the project and have since been reusing the tubes after they're empty. The process is 1) remove the glue nozzle and 2) eject the plunger out the bottom of the tube with compressed air via 3) the hole in the top of the tube.
**Note** If the top hole isn't the right size for the air nozzle, use a wet rag as a gasket over the top hole, then push the air nozzle into the rag to get some good compression in the tube. I use ~80psi and I've done this 20+ times on each tube--works every time. Do this step in the bottom of an old cardboard box for your workspace as it can be quite messy.
Date published: 2017-11-29
Rated 4 out of
5
by
Greg from
worked well in areas it could get under, used a...worked well in areas it could get under, used a vacum on most of it to make it flow better
Date published: 2018-02-13
Rated 5 out of
5
by
JMG from
Works very well, just follow directions to fill in all...Works very well, just follow directions to fill in all gaps under the tile.
Date published: 2018-02-20
Rated 5 out of
5
by
Louis from
5 Star ReviewRating provided by a verified purchaser
Date published: 2018-02-08
Rated 4 out of
5
by
Jello from
Good ProductVery strong liquid adhesive, when used as directed, if floor was completely hollow it might flow under and exit adjacent hole, but in real world, you will get enough under floor to stiffen it up.
Date published: 2014-01-24
Rated 5 out of
5
by
Christopher from
Very easy to use and exactly as Expected. The...Very easy to use and exactly as Expected. The online videos show how to use the product and the results were as indicated. I would highly recommend.
Date published: 2018-01-23
